Metal Template: Vases
-
Size90 x 60 x 55 cm; 79 x 68 x 67 cm; 90 x 60 x 56 cm.
-
Complexity
-
Number of sheets3 pcs.: 125 x 195 cm
Files included:
- DXF file for laser cutting
- PDF files for printing cutting patterns on paper
- PDF file showing bend angles
- PDF welding instruction
Features:
-
metal sheet 2 mm thick;
-
drawing on the front side of the assembled model;
-
most of the welds are on the front side;
-
the cutting contours of the parts contain holes in the corners to relieve stress and contain notches to define fold lines without engraving;
-
fold lines for engraving are marked in different colors according to the bending direction: UP – yellow, DOWN – red.
What to do
- Cut pieces with laser
- Engrave fold lines if you wish
- Assign part numbers with a highlighter
- Use a sheet bending machine
- Weld parts
- Grind welds
- Design the surface as desired
We know how to make a polygonal metal figure. Here you can buy and download drawing and instructions for the creation of metal sculpture.
A detailed description of the drawings can be found in this article:
https://polygonalpaper.com/en/articles/articles/metal-templates/
We provide several DXF file options to choose from:
- DXF files labeled “…-Nesting-…” contain cutting lines only (no engraving). The part contours include stress-relief cuts at bend corners and bend-line notches indicating bend lines without the need for engraving. Part numbers can be marked with a marker after cutting.
- DXF files labeled “…-NestingLabel-…” contain the same cutting lines, including stress-relief cuts and bend-line notches, as well as engraving elements such as bend lines and part numbers. Bend lines in the DOWN direction are marked in red; bend lines in the UP direction are marked in yellow.
- “DXF-Separate”. A folder with files where parts are not nested on a sheet; each part is saved as a separate DXF file.
Designer: Natalia Pogudina. Use of our intellectual property for profit is prohibited. All rights reserved.
Delivery and payment
-
A link with a downloadable file will be emailed to you within an hour following your online payment.
-
Payment method - credit card and other methods provided by Stripe or PayPal
